deciliter to cubic meter
Convert deciliter (dL) to cubic meter (m³). Use an editable volume converter, conversion formula, and reference table.
1 dL = 0.0001 m³
Conversion formula
One deciliter equals 0.0001 cubic meter. Multiply your value in deciliter by this factor to get cubic meter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 deciliter:5 × 0.0001 = 0.0005 m³
Conversion table
| deciliter (dL) | cubic meter (m³) |
|---|---|
| 0.01 | 0.000001 |
| 0.1 | 0.00001 |
| 1 | 0.0001 |
| 2 | 0.0002 |
| 5 | 0.0005 |
| 10 | 0.001 |
| 25 | 0.0025 |
| 50 | 0.005 |
| 100 | 0.01 |
| 1000 | 0.1 |
About these measurements
Volume describes three-dimensional space or liquid capacity.
The base reference used here is the liter. One deciliter is 0.1 base units; one cubic meter is 1,000 base units.
Important distinctions
US liquid measures and Imperial measures are different. Dry gallons and recipe cups are excluded.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert dL to m³?
Multiply the quantity in dL by 0.0001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the cubic meter to deciliter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
