picoliter to cubic meter
Convert picoliter (pL) to cubic meter (m³). Use an editable volume converter, conversion formula, and reference table.
1 pL = 1e-15 m³
Conversion formula
One picoliter equals 1e-15 cubic meter. Multiply your value in picoliter by this factor to get cubic meter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 picoliter:5 × 1e-15 = 5e-15 m³
Conversion table
| picoliter (pL) | cubic meter (m³) |
|---|---|
| 0.01 | 1e-17 |
| 0.1 | 1e-16 |
| 1 | 1e-15 |
| 2 | 2e-15 |
| 5 | 5e-15 |
| 10 | 1e-14 |
| 25 | 2.5e-14 |
| 50 | 5e-14 |
| 100 | 1e-13 |
| 1000 | 1e-12 |
About these measurements
Volume describes three-dimensional space or liquid capacity.
The base reference used here is the liter. One picoliter is 1e-12 base units; one cubic meter is 1,000 base units.
Important distinctions
US liquid measures and Imperial measures are different. Dry gallons and recipe cups are excluded.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert pL to m³?
Multiply the quantity in pL by 1e-15. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the cubic meter to picoliter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
