pound force inch to kilonewton meter
Convert pound force inch (lbf·in) to kilonewton meter (kN·m). Use an editable torque converter, conversion formula, and reference table.
1 lbf·in = 0.000112984829 kN·m
Conversion formula
One pound force inch equals 0.000112984829 kilonewton meter. Multiply your value in pound force inch by this factor to get kilonewton meter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 pound force inch:5 × 0.000112984829 = 0.0005649241451 kN·m
Conversion table
| pound force inch (lbf·in) | kilonewton meter (kN·m) |
|---|---|
| 0.01 | 0.00000112984829 |
| 0.1 | 0.0000112984829 |
| 1 | 0.000112984829 |
| 2 | 0.0002259696581 |
| 5 | 0.0005649241451 |
| 10 | 0.00112984829 |
| 25 | 0.002824620726 |
| 50 | 0.005649241451 |
| 100 | 0.0112984829 |
| 1000 | 0.112984829 |
About these measurements
Torque describes a force’s turning effect around an axis.
The base reference used here is the newton meter. One pound force inch is 0.112984829 base units; one kilonewton meter is 1,000 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert lbf·in to kN·m?
Multiply the quantity in lbf·in by 0.000112984829. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the kilonewton meter to pound force inch converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
