newton meter to kilonewton meter
Convert newton meter (N·m) to kilonewton meter (kN·m). Use an editable torque converter, conversion formula, and reference table.
1 N·m = 0.001 kN·m
Conversion formula
One newton meter equals 0.001 kilonewton meter. Multiply your value in newton meter by this factor to get kilonewton meter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 newton meter:5 × 0.001 = 0.005 kN·m
Conversion table
| newton meter (N·m) | kilonewton meter (kN·m) |
|---|---|
| 0.01 | 0.00001 |
| 0.1 | 0.0001 |
| 1 | 0.001 |
| 2 | 0.002 |
| 5 | 0.005 |
| 10 | 0.01 |
| 25 | 0.025 |
| 50 | 0.05 |
| 100 | 0.1 |
| 1000 | 1 |
About these measurements
Torque describes a force’s turning effect around an axis.
The base reference used here is the newton meter. One newton meter is 1 base units; one kilonewton meter is 1,000 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert N·m to kN·m?
Multiply the quantity in N·m by 0.001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the kilonewton meter to newton meter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
