newton meter to pound force foot
Convert newton meter (N·m) to pound force foot (lbf·ft). Use an editable torque converter, conversion formula, and reference table.
1 N·m = 0.7375621493 lbf·ft
Conversion formula
One newton meter equals 0.7375621493 pound force foot. Multiply your value in newton meter by this factor to get pound force foot. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 newton meter:5 × 0.7375621493 = 3.687810746 lbf·ft
Conversion table
| newton meter (N·m) | pound force foot (lbf·ft) |
|---|---|
| 0.01 | 0.007375621493 |
| 0.1 | 0.07375621493 |
| 1 | 0.7375621493 |
| 2 | 1.475124299 |
| 5 | 3.687810746 |
| 10 | 7.375621493 |
| 25 | 18.43905373 |
| 50 | 36.87810746 |
| 100 | 73.75621493 |
| 1000 | 737.5621493 |
About these measurements
Torque describes a force’s turning effect around an axis.
The base reference used here is the newton meter. One newton meter is 1 base units; one pound force foot is 1.355817948 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert N·m to lbf·ft?
Multiply the quantity in N·m by 0.7375621493. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the pound force foot to newton meter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
