pound force foot to kilogram force meter
Convert pound force foot (lbf·ft) to kilogram force meter (kgf·m). Use an editable torque converter, conversion formula, and reference table.
1 lbf·ft = 0.1382549544 kgf·m
Conversion formula
One pound force foot equals 0.1382549544 kilogram force meter. Multiply your value in pound force foot by this factor to get kilogram force meter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 pound force foot:5 × 0.1382549544 = 0.6912747719 kgf·m
Conversion table
| pound force foot (lbf·ft) | kilogram force meter (kgf·m) |
|---|---|
| 0.01 | 0.001382549544 |
| 0.1 | 0.01382549544 |
| 1 | 0.1382549544 |
| 2 | 0.2765099088 |
| 5 | 0.6912747719 |
| 10 | 1.382549544 |
| 25 | 3.456373859 |
| 50 | 6.912747719 |
| 100 | 13.82549544 |
| 1000 | 138.2549544 |
About these measurements
Torque describes a force’s turning effect around an axis.
The base reference used here is the newton meter. One pound force foot is 1.355817948 base units; one kilogram force meter is 9.80665 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert lbf·ft to kgf·m?
Multiply the quantity in lbf·ft by 0.1382549544. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the kilogram force meter to pound force foot converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
