kilonewton meter to kilogram force meter
Convert kilonewton meter (kN·m) to kilogram force meter (kgf·m). Use an editable torque converter, conversion formula, and reference table.
1 kN·m = 101.9716213 kgf·m
Conversion formula
One kilonewton meter equals 101.9716213 kilogram force meter. Multiply your value in kilonewton meter by this factor to get kilogram force meter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 kilonewton meter:5 × 101.9716213 = 509.8581065 kgf·m
Conversion table
| kilonewton meter (kN·m) | kilogram force meter (kgf·m) |
|---|---|
| 0.01 | 1.019716213 |
| 0.1 | 10.19716213 |
| 1 | 101.9716213 |
| 2 | 203.9432426 |
| 5 | 509.8581065 |
| 10 | 1,019.716213 |
| 25 | 2,549.290532 |
| 50 | 5,098.581065 |
| 100 | 10,197.16213 |
| 1000 | 101,971.6213 |
About these measurements
Torque describes a force’s turning effect around an axis.
The base reference used here is the newton meter. One kilonewton meter is 1,000 base units; one kilogram force meter is 9.80665 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert kN·m to kgf·m?
Multiply the quantity in kN·m by 101.9716213. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the kilogram force meter to kilonewton meter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
