weber to picoweber
Convert weber (Wb) to picoweber (pWb). Use an editable magnetic flux converter, conversion formula, and reference table.
1 Wb = 1e+12 pWb
Conversion formula
One weber equals 1e+12 picoweber. Multiply your value in weber by this factor to get picoweber. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 weber:5 × 1e+12 = 5e+12 pWb
Conversion table
| weber (Wb) | picoweber (pWb) |
|---|---|
| 0.01 | 10,000,000,000 |
| 0.1 | 100,000,000,000 |
| 1 | 1e+12 |
| 2 | 2e+12 |
| 5 | 5e+12 |
| 10 | 1e+13 |
| 25 | 2.5e+13 |
| 50 | 5e+13 |
| 100 | 1e+14 |
| 1000 | 1e+15 |
About these measurements
Magnetic flux describes the magnetic field through a surface.
The base reference used here is the weber. One weber is 1 base units; one picoweber is 1e-12 base units.
Important distinctions
Magnetic flux in webers differs from flux density in teslas.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert Wb to pWb?
Multiply the quantity in Wb by 1e+12. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the picoweber to weber converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
