centiweber to picoweber
Convert centiweber (cWb) to picoweber (pWb). Use an editable magnetic flux converter, conversion formula, and reference table.
1 cWb = 10,000,000,000 pWb
Conversion formula
One centiweber equals 10,000,000,000 picoweber. Multiply your value in centiweber by this factor to get picoweber. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 centiweber:5 × 10,000,000,000 = 50,000,000,000 pWb
Conversion table
| centiweber (cWb) | picoweber (pWb) |
|---|---|
| 0.01 | 100,000,000 |
| 0.1 | 1,000,000,000 |
| 1 | 10,000,000,000 |
| 2 | 20,000,000,000 |
| 5 | 50,000,000,000 |
| 10 | 100,000,000,000 |
| 25 | 250,000,000,000 |
| 50 | 500,000,000,000 |
| 100 | 1e+12 |
| 1000 | 1e+13 |
About these measurements
Magnetic flux describes the magnetic field through a surface.
The base reference used here is the weber. One centiweber is 0.01 base units; one picoweber is 1e-12 base units.
Important distinctions
Magnetic flux in webers differs from flux density in teslas.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert cWb to pWb?
Multiply the quantity in cWb by 10,000,000,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the picoweber to centiweber converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
