megahenry to decahenry
Convert megahenry (MH) to decahenry (daH). Use an editable inductance converter, conversion formula, and reference table.
1 MH = 100,000 daH
Conversion formula
One megahenry equals 100,000 decahenry. Multiply your value in megahenry by this factor to get decahenry. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 megahenry:5 × 100,000 = 500,000 daH
Conversion table
| megahenry (MH) | decahenry (daH) |
|---|---|
| 0.01 | 1,000 |
| 0.1 | 10,000 |
| 1 | 100,000 |
| 2 | 200,000 |
| 5 | 500,000 |
| 10 | 1,000,000 |
| 25 | 2,500,000 |
| 50 | 5,000,000 |
| 100 | 10,000,000 |
| 1000 | 100,000,000 |
About these measurements
Inductance describes the relationship between changing current and induced voltage.
The base reference used here is the henry. One megahenry is 1,000,000 base units; one decahenry is 10 base units.
Important distinctions
A prefix changes only the scale of the inductance unit.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert MH to daH?
Multiply the quantity in MH by 100,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the decahenry to megahenry converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
