decihenry to decahenry
Convert decihenry (dH) to decahenry (daH). Use an editable inductance converter, conversion formula, and reference table.
1 dH = 0.01 daH
Conversion formula
One decihenry equals 0.01 decahenry. Multiply your value in decihenry by this factor to get decahenry. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 decihenry:5 × 0.01 = 0.05 daH
Conversion table
| decihenry (dH) | decahenry (daH) |
|---|---|
| 0.01 | 0.0001 |
| 0.1 | 0.001 |
| 1 | 0.01 |
| 2 | 0.02 |
| 5 | 0.05 |
| 10 | 0.1 |
| 25 | 0.25 |
| 50 | 0.5 |
| 100 | 1 |
| 1000 | 10 |
About these measurements
Inductance describes the relationship between changing current and induced voltage.
The base reference used here is the henry. One decihenry is 0.1 base units; one decahenry is 10 base units.
Important distinctions
A prefix changes only the scale of the inductance unit.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert dH to daH?
Multiply the quantity in dH by 0.01. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the decahenry to decihenry converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
