kilohenry to decahenry
Convert kilohenry (kH) to decahenry (daH). Use an editable inductance converter, conversion formula, and reference table.
1 kH = 100 daH
Conversion formula
One kilohenry equals 100 decahenry. Multiply your value in kilohenry by this factor to get decahenry. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 kilohenry:5 × 100 = 500 daH
Conversion table
| kilohenry (kH) | decahenry (daH) |
|---|---|
| 0.01 | 1 |
| 0.1 | 10 |
| 1 | 100 |
| 2 | 200 |
| 5 | 500 |
| 10 | 1,000 |
| 25 | 2,500 |
| 50 | 5,000 |
| 100 | 10,000 |
| 1000 | 100,000 |
About these measurements
Inductance describes the relationship between changing current and induced voltage.
The base reference used here is the henry. One kilohenry is 1,000 base units; one decahenry is 10 base units.
Important distinctions
A prefix changes only the scale of the inductance unit.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert kH to daH?
Multiply the quantity in kH by 100. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the decahenry to kilohenry converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
