kilosiemens to decisiemens
Convert kilosiemens (kS) to decisiemens (dS). Use an editable electrical conductance converter, conversion formula, and reference table.
1 kS = 10,000 dS
Conversion formula
One kilosiemens equals 10,000 decisiemens. Multiply your value in kilosiemens by this factor to get decisiemens. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 kilosiemens:5 × 10,000 = 50,000 dS
Conversion table
| kilosiemens (kS) | decisiemens (dS) |
|---|---|
| 0.01 | 100 |
| 0.1 | 1,000 |
| 1 | 10,000 |
| 2 | 20,000 |
| 5 | 50,000 |
| 10 | 100,000 |
| 25 | 250,000 |
| 50 | 500,000 |
| 100 | 1,000,000 |
| 1000 | 10,000,000 |
About these measurements
Conductance is the reciprocal of resistance.
The base reference used here is the siemens. One kilosiemens is 1,000 base units; one decisiemens is 0.1 base units.
Important distinctions
To convert resistance into conductance, take a reciprocal. A direct unit conversion does not do that.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert kS to dS?
Multiply the quantity in kS by 10,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the decisiemens to kilosiemens converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
