decasiemens to decisiemens
Convert decasiemens (daS) to decisiemens (dS). Use an editable electrical conductance converter, conversion formula, and reference table.
1 daS = 100 dS
Conversion formula
One decasiemens equals 100 decisiemens. Multiply your value in decasiemens by this factor to get decisiemens. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 decasiemens:5 × 100 = 500 dS
Conversion table
| decasiemens (daS) | decisiemens (dS) |
|---|---|
| 0.01 | 1 |
| 0.1 | 10 |
| 1 | 100 |
| 2 | 200 |
| 5 | 500 |
| 10 | 1,000 |
| 25 | 2,500 |
| 50 | 5,000 |
| 100 | 10,000 |
| 1000 | 100,000 |
About these measurements
Conductance is the reciprocal of resistance.
The base reference used here is the siemens. One decasiemens is 10 base units; one decisiemens is 0.1 base units.
Important distinctions
To convert resistance into conductance, take a reciprocal. A direct unit conversion does not do that.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert daS to dS?
Multiply the quantity in daS by 100. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the decisiemens to decasiemens converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
