meter per second squared to kilometer per hour second
Convert meter per second squared (m/s²) to kilometer per hour second (km/(h·s)). Use an editable acceleration converter, conversion formula, and reference table.
1 m/s² = 3.6 km/(h·s)
Conversion formula
One meter per second squared equals 3.6 kilometer per hour second. Multiply your value in meter per second squared by this factor to get kilometer per hour second. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 meter per second squared:5 × 3.6 = 18 km/(h·s)
Conversion table
| meter per second squared (m/s²) | kilometer per hour second (km/(h·s)) |
|---|---|
| 0.01 | 0.036 |
| 0.1 | 0.36 |
| 1 | 3.6 |
| 2 | 7.2 |
| 5 | 18 |
| 10 | 36 |
| 25 | 90 |
| 50 | 180 |
| 100 | 360 |
| 1000 | 3,600 |
About these measurements
Acceleration is the rate of velocity change.
The base reference used here is the meter per second squared. One meter per second squared is 1 base units; one kilometer per hour second is 0.2777777778 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert m/s² to km/(h·s)?
Multiply the quantity in m/s² by 3.6. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the kilometer per hour second to meter per second squared converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
