US fluid ounce to picoliter
Convert US fluid ounce (US fl oz) to picoliter (pL). Use an editable volume converter, conversion formula, and reference table.
1 US fl oz = 29,573,529,560 pL
Conversion formula
One US fluid ounce equals 29,573,529,560 picoliter. Multiply your value in US fluid ounce by this factor to get picoliter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 US fluid ounce:5 × 29,573,529,560 = 147,867,647,800 pL
Conversion table
| US fluid ounce (US fl oz) | picoliter (pL) |
|---|---|
| 0.01 | 295,735,295.6 |
| 0.1 | 2,957,352,956 |
| 1 | 29,573,529,560 |
| 2 | 59,147,059,130 |
| 5 | 147,867,647,800 |
| 10 | 295,735,295,600 |
| 25 | 739,338,239,100 |
| 50 | 1.47867648e+12 |
| 100 | 2.95735296e+12 |
| 1000 | 2.95735296e+13 |
About these measurements
Volume describes three-dimensional space or liquid capacity.
The base reference used here is the liter. One US fluid ounce is 0.02957352956 base units; one picoliter is 1e-12 base units.
Important distinctions
US liquid measures and Imperial measures are different. Dry gallons and recipe cups are excluded.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert US fl oz to pL?
Multiply the quantity in US fl oz by 29,573,529,560. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the picoliter to US fluid ounce converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
