cubic meter to gigaliter
Convert cubic meter (m³) to gigaliter (GL). Use an editable volume converter, conversion formula, and reference table.
1 m³ = 0.000001 GL
Conversion formula
One cubic meter equals 0.000001 gigaliter. Multiply your value in cubic meter by this factor to get gigaliter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 cubic meter:5 × 0.000001 = 0.000005 GL
Conversion table
| cubic meter (m³) | gigaliter (GL) |
|---|---|
| 0.01 | 1e-8 |
| 0.1 | 1e-7 |
| 1 | 0.000001 |
| 2 | 0.000002 |
| 5 | 0.000005 |
| 10 | 0.00001 |
| 25 | 0.000025 |
| 50 | 0.00005 |
| 100 | 0.0001 |
| 1000 | 0.001 |
About these measurements
Volume describes three-dimensional space or liquid capacity.
The base reference used here is the liter. One cubic meter is 1,000 base units; one gigaliter is 1,000,000,000 base units.
Important distinctions
US liquid measures and Imperial measures are different. Dry gallons and recipe cups are excluded.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert m³ to GL?
Multiply the quantity in m³ by 0.000001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the gigaliter to cubic meter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
