cubic meter to decaliter
Convert cubic meter (m³) to decaliter (daL). Use an editable volume converter, conversion formula, and reference table.
1 m³ = 100 daL
Conversion formula
One cubic meter equals 100 decaliter. Multiply your value in cubic meter by this factor to get decaliter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 cubic meter:5 × 100 = 500 daL
Conversion table
| cubic meter (m³) | decaliter (daL) |
|---|---|
| 0.01 | 1 |
| 0.1 | 10 |
| 1 | 100 |
| 2 | 200 |
| 5 | 500 |
| 10 | 1,000 |
| 25 | 2,500 |
| 50 | 5,000 |
| 100 | 10,000 |
| 1000 | 100,000 |
About these measurements
Volume describes three-dimensional space or liquid capacity.
The base reference used here is the liter. One cubic meter is 1,000 base units; one decaliter is 10 base units.
Important distinctions
US liquid measures and Imperial measures are different. Dry gallons and recipe cups are excluded.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert m³ to daL?
Multiply the quantity in m³ by 100. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the decaliter to cubic meter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
