teravolt to picovolt
Convert teravolt (TV) to picovolt (pV). Use an editable voltage converter, conversion formula, and reference table.
1 TV = 1e+24 pV
Conversion formula
One teravolt equals 1e+24 picovolt. Multiply your value in teravolt by this factor to get picovolt. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 teravolt:5 × 1e+24 = 5e+24 pV
Conversion table
| teravolt (TV) | picovolt (pV) |
|---|---|
| 0.01 | 1e+22 |
| 0.1 | 1e+23 |
| 1 | 1e+24 |
| 2 | 2e+24 |
| 5 | 5e+24 |
| 10 | 1e+25 |
| 25 | 2.5e+25 |
| 50 | 5e+25 |
| 100 | 1e+26 |
| 1000 | 1e+27 |
About these measurements
Voltage is electric potential difference.
The base reference used here is the volt. One teravolt is 1e+12 base units; one picovolt is 1e-12 base units.
Important distinctions
This converts units, not RMS, peak, or peak-to-peak representations.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert TV to pV?
Multiply the quantity in TV by 1e+24. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the picovolt to teravolt converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
