nanovolt to hectovolt
Convert nanovolt (nV) to hectovolt (hV). Use an editable voltage converter, conversion formula, and reference table.
1 nV = 1e-11 hV
Conversion formula
One nanovolt equals 1e-11 hectovolt. Multiply your value in nanovolt by this factor to get hectovolt. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 nanovolt:5 × 1e-11 = 5e-11 hV
Conversion table
| nanovolt (nV) | hectovolt (hV) |
|---|---|
| 0.01 | 1e-13 |
| 0.1 | 1e-12 |
| 1 | 1e-11 |
| 2 | 2e-11 |
| 5 | 5e-11 |
| 10 | 1e-10 |
| 25 | 2.5e-10 |
| 50 | 5e-10 |
| 100 | 1e-9 |
| 1000 | 1e-8 |
About these measurements
Voltage is electric potential difference.
The base reference used here is the volt. One nanovolt is 1e-9 base units; one hectovolt is 100 base units.
Important distinctions
This converts units, not RMS, peak, or peak-to-peak representations.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert nV to hV?
Multiply the quantity in nV by 1e-11. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the hectovolt to nanovolt converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
