kilogram force meter to newton millimeter
Convert kilogram force meter (kgf·m) to newton millimeter (N·mm). Use an editable torque converter, conversion formula, and reference table.
1 kgf·m = 9,806.65 N·mm
Conversion formula
One kilogram force meter equals 9,806.65 newton millimeter. Multiply your value in kilogram force meter by this factor to get newton millimeter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 kilogram force meter:5 × 9,806.65 = 49,033.25 N·mm
Conversion table
| kilogram force meter (kgf·m) | newton millimeter (N·mm) |
|---|---|
| 0.01 | 98.0665 |
| 0.1 | 980.665 |
| 1 | 9,806.65 |
| 2 | 19,613.3 |
| 5 | 49,033.25 |
| 10 | 98,066.5 |
| 25 | 245,166.25 |
| 50 | 490,332.5 |
| 100 | 980,665 |
| 1000 | 9,806,650 |
About these measurements
Torque describes a force’s turning effect around an axis.
The base reference used here is the newton meter. One kilogram force meter is 9.80665 base units; one newton millimeter is 0.001 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert kgf·m to N·mm?
Multiply the quantity in kgf·m by 9,806.65. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the newton millimeter to kilogram force meter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
