newton per meter to pound force per foot
Convert newton per meter (N/m) to pound force per foot (lbf/ft). Use an editable surface tension converter, conversion formula, and reference table.
1 N/m = 0.06852176586 lbf/ft
Conversion formula
One newton per meter equals 0.06852176586 pound force per foot. Multiply your value in newton per meter by this factor to get pound force per foot. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 newton per meter:5 × 0.06852176586 = 0.3426088293 lbf/ft
Conversion table
| newton per meter (N/m) | pound force per foot (lbf/ft) |
|---|---|
| 0.01 | 0.0006852176586 |
| 0.1 | 0.006852176586 |
| 1 | 0.06852176586 |
| 2 | 0.1370435317 |
| 5 | 0.3426088293 |
| 10 | 0.6852176586 |
| 25 | 1.713044146 |
| 50 | 3.426088293 |
| 100 | 6.852176586 |
| 1000 | 68.52176586 |
About these measurements
Surface tension describes force per unit length along a liquid interface.
The base reference used here is the newton per meter. One newton per meter is 1 base units; one pound force per foot is 14.59390294 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert N/m to lbf/ft?
Multiply the quantity in N/m by 0.06852176586. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the pound force per foot to newton per meter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
