inch per second to nautical mile per second
Convert inch per second (in/s) to nautical mile per second (nmi/s). Use an editable speed converter, conversion formula, and reference table.
1 in/s = 0.00001371490281 nmi/s
Conversion formula
One inch per second equals 0.00001371490281 nautical mile per second. Multiply your value in inch per second by this factor to get nautical mile per second. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 inch per second:5 × 0.00001371490281 = 0.00006857451404 nmi/s
Conversion table
| inch per second (in/s) | nautical mile per second (nmi/s) |
|---|---|
| 0.01 | 1.37149028e-7 |
| 0.1 | 0.000001371490281 |
| 1 | 0.00001371490281 |
| 2 | 0.00002742980562 |
| 5 | 0.00006857451404 |
| 10 | 0.0001371490281 |
| 25 | 0.0003428725702 |
| 50 | 0.0006857451404 |
| 100 | 0.001371490281 |
| 1000 | 0.01371490281 |
About these measurements
Speed is distance traveled per unit of time.
The base reference used here is the meter per second. One inch per second is 0.0254 base units; one nautical mile per second is 1,852 base units.
Important distinctions
Mach is excluded because the speed of sound depends on medium and temperature.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert in/s to nmi/s?
Multiply the quantity in in/s by 0.00001371490281. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the nautical mile per second to inch per second converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
