petaohm to decaohm
Convert petaohm (PΩ) to decaohm (daΩ). Use an editable electrical resistance converter, conversion formula, and reference table.
1 PΩ = 1e+14 daΩ
Conversion formula
One petaohm equals 1e+14 decaohm. Multiply your value in petaohm by this factor to get decaohm. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 petaohm:5 × 1e+14 = 5e+14 daΩ
Conversion table
| petaohm (PΩ) | decaohm (daΩ) |
|---|---|
| 0.01 | 1e+12 |
| 0.1 | 1e+13 |
| 1 | 1e+14 |
| 2 | 2e+14 |
| 5 | 5e+14 |
| 10 | 1e+15 |
| 25 | 2.5e+15 |
| 50 | 5e+15 |
| 100 | 1e+16 |
| 1000 | 1e+17 |
About these measurements
Resistance relates voltage to current for a given element.
The base reference used here is the ohm. One petaohm is 1e+15 base units; one decaohm is 10 base units.
Important distinctions
Resistance and impedance are not the same physical quantity.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert PΩ to daΩ?
Multiply the quantity in PΩ by 1e+14. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the decaohm to petaohm converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
