terapascal to gigapascal
Convert terapascal (TPa) to gigapascal (GPa). Use an editable pressure converter, conversion formula, and reference table.
1 TPa = 1,000 GPa
Conversion formula
One terapascal equals 1,000 gigapascal. Multiply your value in terapascal by this factor to get gigapascal. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 terapascal:5 × 1,000 = 5,000 GPa
Conversion table
| terapascal (TPa) | gigapascal (GPa) |
|---|---|
| 0.01 | 10 |
| 0.1 | 100 |
| 1 | 1,000 |
| 2 | 2,000 |
| 5 | 5,000 |
| 10 | 10,000 |
| 25 | 25,000 |
| 50 | 50,000 |
| 100 | 100,000 |
| 1000 | 1,000,000 |
About these measurements
Pressure is force per unit of area.
The base reference used here is the pascal. One terapascal is 1e+12 base units; one gigapascal is 1,000,000,000 base units.
Important distinctions
Gauge and absolute pressures must not be mixed. This converts units without changing the reference pressure.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert TPa to GPa?
Multiply the quantity in TPa by 1,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the gigapascal to terapascal converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
