pascal to pound-force per square inch
Convert pascal (Pa) to pound-force per square inch (psi). Use an editable pressure converter, conversion formula, and reference table.
1 Pa = 0.0001450377377 psi
Conversion formula
One pascal equals 0.0001450377377 pound-force per square inch. Multiply your value in pascal by this factor to get pound-force per square inch. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 pascal:5 × 0.0001450377377 = 0.0007251886887 psi
Conversion table
| pascal (Pa) | pound-force per square inch (psi) |
|---|---|
| 0.01 | 0.000001450377377 |
| 0.1 | 0.00001450377377 |
| 1 | 0.0001450377377 |
| 2 | 0.0002900754755 |
| 5 | 0.0007251886887 |
| 10 | 0.001450377377 |
| 25 | 0.003625943443 |
| 50 | 0.007251886887 |
| 100 | 0.01450377377 |
| 1000 | 0.1450377377 |
About these measurements
Pressure is force per unit of area.
The base reference used here is the pascal. One pascal is 1 base units; one pound-force per square inch is 6,894.757293 base units.
Important distinctions
Gauge and absolute pressures must not be mixed. This converts units without changing the reference pressure.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert Pa to psi?
Multiply the quantity in Pa by 0.0001450377377. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the pound-force per square inch to pascal converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
