millipascal to torr
Convert millipascal (mPa) to torr (Torr). Use an editable pressure converter, conversion formula, and reference table.
1 mPa = 0.000007500616827 Torr
Conversion formula
One millipascal equals 0.000007500616827 torr. Multiply your value in millipascal by this factor to get torr. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 millipascal:5 × 0.000007500616827 = 0.00003750308414 Torr
Conversion table
| millipascal (mPa) | torr (Torr) |
|---|---|
| 0.01 | 7.50061683e-8 |
| 0.1 | 7.50061683e-7 |
| 1 | 0.000007500616827 |
| 2 | 0.00001500123365 |
| 5 | 0.00003750308414 |
| 10 | 0.00007500616827 |
| 25 | 0.0001875154207 |
| 50 | 0.0003750308414 |
| 100 | 0.0007500616827 |
| 1000 | 0.007500616827 |
About these measurements
Pressure is force per unit of area.
The base reference used here is the pascal. One millipascal is 0.001 base units; one torr is 133.3223684 base units.
Important distinctions
Gauge and absolute pressures must not be mixed. This converts units without changing the reference pressure.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert mPa to Torr?
Multiply the quantity in mPa by 0.000007500616827. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the torr to millipascal converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
