megapascal to decapascal
Convert megapascal (MPa) to decapascal (daPa). Use an editable pressure converter, conversion formula, and reference table.
1 MPa = 100,000 daPa
Conversion formula
One megapascal equals 100,000 decapascal. Multiply your value in megapascal by this factor to get decapascal. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 megapascal:5 × 100,000 = 500,000 daPa
Conversion table
| megapascal (MPa) | decapascal (daPa) |
|---|---|
| 0.01 | 1,000 |
| 0.1 | 10,000 |
| 1 | 100,000 |
| 2 | 200,000 |
| 5 | 500,000 |
| 10 | 1,000,000 |
| 25 | 2,500,000 |
| 50 | 5,000,000 |
| 100 | 10,000,000 |
| 1000 | 100,000,000 |
About these measurements
Pressure is force per unit of area.
The base reference used here is the pascal. One megapascal is 1,000,000 base units; one decapascal is 10 base units.
Important distinctions
Gauge and absolute pressures must not be mixed. This converts units without changing the reference pressure.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert MPa to daPa?
Multiply the quantity in MPa by 100,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the decapascal to megapascal converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
