decapascal to micropascal
Convert decapascal (daPa) to micropascal (μPa). Use an editable pressure converter, conversion formula, and reference table.
1 daPa = 10,000,000 μPa
Conversion formula
One decapascal equals 10,000,000 micropascal. Multiply your value in decapascal by this factor to get micropascal. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 decapascal:5 × 10,000,000 = 50,000,000 μPa
Conversion table
| decapascal (daPa) | micropascal (μPa) |
|---|---|
| 0.01 | 100,000 |
| 0.1 | 1,000,000 |
| 1 | 10,000,000 |
| 2 | 20,000,000 |
| 5 | 50,000,000 |
| 10 | 100,000,000 |
| 25 | 250,000,000 |
| 50 | 500,000,000 |
| 100 | 1,000,000,000 |
| 1000 | 10,000,000,000 |
About these measurements
Pressure is force per unit of area.
The base reference used here is the pascal. One decapascal is 10 base units; one micropascal is 0.000001 base units.
Important distinctions
Gauge and absolute pressures must not be mixed. This converts units without changing the reference pressure.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert daPa to μPa?
Multiply the quantity in daPa by 10,000,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the micropascal to decapascal converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
