centipascal to picopascal
Convert centipascal (cPa) to picopascal (pPa). Use an editable pressure converter, conversion formula, and reference table.
1 cPa = 10,000,000,000 pPa
Conversion formula
One centipascal equals 10,000,000,000 picopascal. Multiply your value in centipascal by this factor to get picopascal. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 centipascal:5 × 10,000,000,000 = 50,000,000,000 pPa
Conversion table
| centipascal (cPa) | picopascal (pPa) |
|---|---|
| 0.01 | 100,000,000 |
| 0.1 | 1,000,000,000 |
| 1 | 10,000,000,000 |
| 2 | 20,000,000,000 |
| 5 | 50,000,000,000 |
| 10 | 100,000,000,000 |
| 25 | 250,000,000,000 |
| 50 | 500,000,000,000 |
| 100 | 1e+12 |
| 1000 | 1e+13 |
About these measurements
Pressure is force per unit of area.
The base reference used here is the pascal. One centipascal is 0.01 base units; one picopascal is 1e-12 base units.
Important distinctions
Gauge and absolute pressures must not be mixed. This converts units without changing the reference pressure.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert cPa to pPa?
Multiply the quantity in cPa by 10,000,000,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the picopascal to centipascal converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
