bar to femtopascal
Convert bar (bar) to femtopascal (fPa). Use an editable pressure converter, conversion formula, and reference table.
1 bar = 1e+20 fPa
Conversion formula
One bar equals 1e+20 femtopascal. Multiply your value in bar by this factor to get femtopascal. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 bar:5 × 1e+20 = 5e+20 fPa
Conversion table
| bar (bar) | femtopascal (fPa) |
|---|---|
| 0.01 | 1e+18 |
| 0.1 | 1e+19 |
| 1 | 1e+20 |
| 2 | 2e+20 |
| 5 | 5e+20 |
| 10 | 1e+21 |
| 25 | 2.5e+21 |
| 50 | 5e+21 |
| 100 | 1e+22 |
| 1000 | 1e+23 |
About these measurements
Pressure is force per unit of area.
The base reference used here is the pascal. One bar is 100,000 base units; one femtopascal is 1e-15 base units.
Important distinctions
Gauge and absolute pressures must not be mixed. This converts units without changing the reference pressure.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert bar to fPa?
Multiply the quantity in bar by 1e+20. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the femtopascal to bar converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
