gram per second to tonne per hour
Convert gram per second (g/s) to tonne per hour (t/h). Use an editable mass flow rate converter, conversion formula, and reference table.
1 g/s = 0.0036 t/h
Conversion formula
One gram per second equals 0.0036 tonne per hour. Multiply your value in gram per second by this factor to get tonne per hour. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 gram per second:5 × 0.0036 = 0.018 t/h
Conversion table
| gram per second (g/s) | tonne per hour (t/h) |
|---|---|
| 0.01 | 0.000036 |
| 0.1 | 0.00036 |
| 1 | 0.0036 |
| 2 | 0.0072 |
| 5 | 0.018 |
| 10 | 0.036 |
| 25 | 0.09 |
| 50 | 0.18 |
| 100 | 0.36 |
| 1000 | 3.6 |
About these measurements
Mass flow rate measures mass passing a point per unit time.
The base reference used here is the kilogram per second. One gram per second is 0.001 base units; one tonne per hour is 0.2777777778 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert g/s to t/h?
Multiply the quantity in g/s by 0.0036. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the tonne per hour to gram per second converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
