gigaweber to petaweber
Convert gigaweber (GWb) to petaweber (PWb). Use an editable magnetic flux converter, conversion formula, and reference table.
1 GWb = 0.000001 PWb
Conversion formula
One gigaweber equals 0.000001 petaweber. Multiply your value in gigaweber by this factor to get petaweber. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 gigaweber:5 × 0.000001 = 0.000005 PWb
Conversion table
| gigaweber (GWb) | petaweber (PWb) |
|---|---|
| 0.01 | 1e-8 |
| 0.1 | 1e-7 |
| 1 | 0.000001 |
| 2 | 0.000002 |
| 5 | 0.000005 |
| 10 | 0.00001 |
| 25 | 0.000025 |
| 50 | 0.00005 |
| 100 | 0.0001 |
| 1000 | 0.001 |
About these measurements
Magnetic flux describes the magnetic field through a surface.
The base reference used here is the weber. One gigaweber is 1,000,000,000 base units; one petaweber is 1e+15 base units.
Important distinctions
Magnetic flux in webers differs from flux density in teslas.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert GWb to PWb?
Multiply the quantity in GWb by 0.000001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the petaweber to gigaweber converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
