femtoweber to nanoweber
Convert femtoweber (fWb) to nanoweber (nWb). Use an editable magnetic flux converter, conversion formula, and reference table.
1 fWb = 0.000001 nWb
Conversion formula
One femtoweber equals 0.000001 nanoweber. Multiply your value in femtoweber by this factor to get nanoweber. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 femtoweber:5 × 0.000001 = 0.000005 nWb
Conversion table
| femtoweber (fWb) | nanoweber (nWb) |
|---|---|
| 0.01 | 1e-8 |
| 0.1 | 1e-7 |
| 1 | 0.000001 |
| 2 | 0.000002 |
| 5 | 0.000005 |
| 10 | 0.00001 |
| 25 | 0.000025 |
| 50 | 0.00005 |
| 100 | 0.0001 |
| 1000 | 0.001 |
About these measurements
Magnetic flux describes the magnetic field through a surface.
The base reference used here is the weber. One femtoweber is 1e-15 base units; one nanoweber is 1e-9 base units.
Important distinctions
Magnetic flux in webers differs from flux density in teslas.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert fWb to nWb?
Multiply the quantity in fWb by 0.000001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the nanoweber to femtoweber converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
