millitesla to picotesla
Convert millitesla (mT) to picotesla (pT). Use an editable magnetic flux density converter, conversion formula, and reference table.
1 mT = 1,000,000,000 pT
Conversion formula
One millitesla equals 1,000,000,000 picotesla. Multiply your value in millitesla by this factor to get picotesla. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 millitesla:5 × 1,000,000,000 = 5,000,000,000 pT
Conversion table
| millitesla (mT) | picotesla (pT) |
|---|---|
| 0.01 | 10,000,000 |
| 0.1 | 100,000,000 |
| 1 | 1,000,000,000 |
| 2 | 2,000,000,000 |
| 5 | 5,000,000,000 |
| 10 | 10,000,000,000 |
| 25 | 25,000,000,000 |
| 50 | 50,000,000,000 |
| 100 | 100,000,000,000 |
| 1000 | 1e+12 |
About these measurements
Magnetic flux density describes a magnetic field over area.
The base reference used here is the tesla. One millitesla is 0.001 base units; one picotesla is 1e-12 base units.
Important distinctions
One gauss equals 0.0001 tesla.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert mT to pT?
Multiply the quantity in mT by 1,000,000,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the picotesla to millitesla converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
