kilotesla to decitesla
Convert kilotesla (kT) to decitesla (dT). Use an editable magnetic flux density converter, conversion formula, and reference table.
1 kT = 10,000 dT
Conversion formula
One kilotesla equals 10,000 decitesla. Multiply your value in kilotesla by this factor to get decitesla. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 kilotesla:5 × 10,000 = 50,000 dT
Conversion table
| kilotesla (kT) | decitesla (dT) |
|---|---|
| 0.01 | 100 |
| 0.1 | 1,000 |
| 1 | 10,000 |
| 2 | 20,000 |
| 5 | 50,000 |
| 10 | 100,000 |
| 25 | 250,000 |
| 50 | 500,000 |
| 100 | 1,000,000 |
| 1000 | 10,000,000 |
About these measurements
Magnetic flux density describes a magnetic field over area.
The base reference used here is the tesla. One kilotesla is 1,000 base units; one decitesla is 0.1 base units.
Important distinctions
One gauss equals 0.0001 tesla.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert kT to dT?
Multiply the quantity in kT by 10,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the decitesla to kilotesla converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
