nanolumen to megalumen
Convert nanolumen (nlm) to megalumen (Mlm). Use an editable luminous flux converter, conversion formula, and reference table.
1 nlm = 1e-15 Mlm
Conversion formula
One nanolumen equals 1e-15 megalumen. Multiply your value in nanolumen by this factor to get megalumen. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 nanolumen:5 × 1e-15 = 5e-15 Mlm
Conversion table
| nanolumen (nlm) | megalumen (Mlm) |
|---|---|
| 0.01 | 1e-17 |
| 0.1 | 1e-16 |
| 1 | 1e-15 |
| 2 | 2e-15 |
| 5 | 5e-15 |
| 10 | 1e-14 |
| 25 | 2.5e-14 |
| 50 | 5e-14 |
| 100 | 1e-13 |
| 1000 | 1e-12 |
About these measurements
Luminous flux measures the visible-light output weighted by human visual sensitivity.
The base reference used here is the lumen. One nanolumen is 1e-9 base units; one megalumen is 1,000,000 base units.
Important distinctions
Lumens measure light output; lux measures illumination per unit area.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert nlm to Mlm?
Multiply the quantity in nlm by 1e-15. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the megalumen to nanolumen converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
