micrometer to attometer
Convert micrometer (μm) to attometer (am). Use an editable length converter, conversion formula, and reference table.
1 μm = 1,000,000,000,000 am
Conversion formula
One micrometer equals 1,000,000,000,000 attometer. Multiply your value in micrometer by this factor to get attometer. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 micrometer:5 × 1,000,000,000,000 = 5e+12 am
Conversion table
| micrometer (μm) | attometer (am) |
|---|---|
| 0.01 | 10,000,000,000 |
| 0.1 | 100,000,000,000 |
| 1 | 1,000,000,000,000 |
| 2 | 2e+12 |
| 5 | 5e+12 |
| 10 | 1e+13 |
| 25 | 2.5e+13 |
| 50 | 5e+13 |
| 100 | 1e+14 |
| 1000 | 1e+15 |
About these measurements
Length measures the distance between two points.
The base reference used here is the meter. One micrometer is 0.000001 base units; one attometer is 1e-18 base units.
Important distinctions
International feet and inches are used. Survey feet are not included.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert μm to am?
Multiply the quantity in μm by 1,000,000,000,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the attometer to micrometer converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
