inch to micrometer
Convert inch (in) to micrometer (μm). Use an editable length converter, conversion formula, and reference table.
1 in = 25,400 μm
Conversion formula
One inch equals 25,400 micrometer. Multiply your value in inch by this factor to get micrometer. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 inch:5 × 25,400 = 127,000 μm
Conversion table
| inch (in) | micrometer (μm) |
|---|---|
| 0.01 | 254 |
| 0.1 | 2,540 |
| 1 | 25,400 |
| 2 | 50,800 |
| 5 | 127,000 |
| 10 | 254,000 |
| 25 | 635,000 |
| 50 | 1,270,000 |
| 100 | 2,540,000 |
| 1000 | 25,400,000 |
About these measurements
Length measures the distance between two points.
The base reference used here is the meter. One inch is 0.0254 base units; one micrometer is 0.000001 base units.
Important distinctions
International feet and inches are used. Survey feet are not included.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert in to μm?
Multiply the quantity in in by 25,400. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the micrometer to inch converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
