decimeter to inch
Convert decimeter (dm) to inch (in). Use an editable length converter, conversion formula, and reference table.
1 dm = 3.937007874 in
Conversion formula
One decimeter equals 3.937007874 inch. Multiply your value in decimeter by this factor to get inch. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 decimeter:5 × 3.937007874 = 19.68503937 in
Conversion table
| decimeter (dm) | inch (in) |
|---|---|
| 0.01 | 0.03937007874 |
| 0.1 | 0.3937007874 |
| 1 | 3.937007874 |
| 2 | 7.874015748 |
| 5 | 19.68503937 |
| 10 | 39.37007874 |
| 25 | 98.42519685 |
| 50 | 196.8503937 |
| 100 | 393.7007874 |
| 1000 | 3,937.007874 |
About these measurements
Length measures the distance between two points.
The base reference used here is the meter. One decimeter is 0.1 base units; one inch is 0.0254 base units.
Important distinctions
International feet and inches are used. Survey feet are not included.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert dm to in?
Multiply the quantity in dm by 3.937007874. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the inch to decimeter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
