decameter to megameter
Convert decameter (dam) to megameter (Mm). Use an editable length converter, conversion formula, and reference table.
1 dam = 0.00001 Mm
Conversion formula
One decameter equals 0.00001 megameter. Multiply your value in decameter by this factor to get megameter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 decameter:5 × 0.00001 = 0.00005 Mm
Conversion table
| decameter (dam) | megameter (Mm) |
|---|---|
| 0.01 | 1e-7 |
| 0.1 | 0.000001 |
| 1 | 0.00001 |
| 2 | 0.00002 |
| 5 | 0.00005 |
| 10 | 0.0001 |
| 25 | 0.00025 |
| 50 | 0.0005 |
| 100 | 0.001 |
| 1000 | 0.01 |
About these measurements
Length measures the distance between two points.
The base reference used here is the meter. One decameter is 10 base units; one megameter is 1,000,000 base units.
Important distinctions
International feet and inches are used. Survey feet are not included.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert dam to Mm?
Multiply the quantity in dam by 0.00001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the megameter to decameter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
