decameter to foot
Convert decameter (dam) to foot (ft). Use an editable length converter, conversion formula, and reference table.
1 dam = 32.80839895 ft
Conversion formula
One decameter equals 32.80839895 foot. Multiply your value in decameter by this factor to get foot. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 decameter:5 × 32.80839895 = 164.0419948 ft
Conversion table
| decameter (dam) | foot (ft) |
|---|---|
| 0.01 | 0.3280839895 |
| 0.1 | 3.280839895 |
| 1 | 32.80839895 |
| 2 | 65.6167979 |
| 5 | 164.0419948 |
| 10 | 328.0839895 |
| 25 | 820.2099738 |
| 50 | 1,640.419948 |
| 100 | 3,280.839895 |
| 1000 | 32,808.39895 |
About these measurements
Length measures the distance between two points.
The base reference used here is the meter. One decameter is 10 base units; one foot is 0.3048 base units.
Important distinctions
International feet and inches are used. Survey feet are not included.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert dam to ft?
Multiply the quantity in dam by 32.80839895. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the foot to decameter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
