square centimeter per second to centistokes
Convert square centimeter per second (cm²/s) to centistokes (cSt). Use an editable kinematic viscosity converter, conversion formula, and reference table.
1 cm²/s = 100 cSt
Conversion formula
One square centimeter per second equals 100 centistokes. Multiply your value in square centimeter per second by this factor to get centistokes. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 square centimeter per second:5 × 100 = 500 cSt
Conversion table
| square centimeter per second (cm²/s) | centistokes (cSt) |
|---|---|
| 0.01 | 1 |
| 0.1 | 10 |
| 1 | 100 |
| 2 | 200 |
| 5 | 500 |
| 10 | 1,000 |
| 25 | 2,500 |
| 50 | 5,000 |
| 100 | 10,000 |
| 1000 | 100,000 |
About these measurements
Kinematic viscosity is dynamic viscosity divided by density.
The base reference used here is the square meter per second. One square centimeter per second is 0.0001 base units; one centistokes is 0.000001 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert cm²/s to cSt?
Multiply the quantity in cm²/s by 100. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the centistokes to square centimeter per second converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
