millihenry to hectohenry
Convert millihenry (mH) to hectohenry (hH). Use an editable inductance converter, conversion formula, and reference table.
1 mH = 0.00001 hH
Conversion formula
One millihenry equals 0.00001 hectohenry. Multiply your value in millihenry by this factor to get hectohenry. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 millihenry:5 × 0.00001 = 0.00005 hH
Conversion table
| millihenry (mH) | hectohenry (hH) |
|---|---|
| 0.01 | 1e-7 |
| 0.1 | 0.000001 |
| 1 | 0.00001 |
| 2 | 0.00002 |
| 5 | 0.00005 |
| 10 | 0.0001 |
| 25 | 0.00025 |
| 50 | 0.0005 |
| 100 | 0.001 |
| 1000 | 0.01 |
About these measurements
Inductance describes the relationship between changing current and induced voltage.
The base reference used here is the henry. One millihenry is 0.001 base units; one hectohenry is 100 base units.
Important distinctions
A prefix changes only the scale of the inductance unit.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert mH to hH?
Multiply the quantity in mH by 0.00001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the hectohenry to millihenry converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
