hectohenry to megahenry
Convert hectohenry (hH) to megahenry (MH). Use an editable inductance converter, conversion formula, and reference table.
1 hH = 0.0001 MH
Conversion formula
One hectohenry equals 0.0001 megahenry. Multiply your value in hectohenry by this factor to get megahenry. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 hectohenry:5 × 0.0001 = 0.0005 MH
Conversion table
| hectohenry (hH) | megahenry (MH) |
|---|---|
| 0.01 | 0.000001 |
| 0.1 | 0.00001 |
| 1 | 0.0001 |
| 2 | 0.0002 |
| 5 | 0.0005 |
| 10 | 0.001 |
| 25 | 0.0025 |
| 50 | 0.005 |
| 100 | 0.01 |
| 1000 | 0.1 |
About these measurements
Inductance describes the relationship between changing current and induced voltage.
The base reference used here is the henry. One hectohenry is 100 base units; one megahenry is 1,000,000 base units.
Important distinctions
A prefix changes only the scale of the inductance unit.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert hH to MH?
Multiply the quantity in hH by 0.0001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the megahenry to hectohenry converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
