hectohenry to henry
Convert hectohenry (hH) to henry (H). Use an editable inductance converter, conversion formula, and reference table.
1 hH = 100 H
Conversion formula
One hectohenry equals 100 henry. Multiply your value in hectohenry by this factor to get henry. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 hectohenry:5 × 100 = 500 H
Conversion table
| hectohenry (hH) | henry (H) |
|---|---|
| 0.01 | 1 |
| 0.1 | 10 |
| 1 | 100 |
| 2 | 200 |
| 5 | 500 |
| 10 | 1,000 |
| 25 | 2,500 |
| 50 | 5,000 |
| 100 | 10,000 |
| 1000 | 100,000 |
About these measurements
Inductance describes the relationship between changing current and induced voltage.
The base reference used here is the henry. One hectohenry is 100 base units; one henry is 1 base units.
Important distinctions
A prefix changes only the scale of the inductance unit.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert hH to H?
Multiply the quantity in hH by 100. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the henry to hectohenry converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
