gigahenry to petahenry
Convert gigahenry (GH) to petahenry (PH). Use an editable inductance converter, conversion formula, and reference table.
1 GH = 0.000001 PH
Conversion formula
One gigahenry equals 0.000001 petahenry. Multiply your value in gigahenry by this factor to get petahenry. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 gigahenry:5 × 0.000001 = 0.000005 PH
Conversion table
| gigahenry (GH) | petahenry (PH) |
|---|---|
| 0.01 | 1e-8 |
| 0.1 | 1e-7 |
| 1 | 0.000001 |
| 2 | 0.000002 |
| 5 | 0.000005 |
| 10 | 0.00001 |
| 25 | 0.000025 |
| 50 | 0.00005 |
| 100 | 0.0001 |
| 1000 | 0.001 |
About these measurements
Inductance describes the relationship between changing current and induced voltage.
The base reference used here is the henry. One gigahenry is 1,000,000,000 base units; one petahenry is 1e+15 base units.
Important distinctions
A prefix changes only the scale of the inductance unit.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert GH to PH?
Multiply the quantity in GH by 0.000001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the petahenry to gigahenry converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
