decahenry to millihenry
Convert decahenry (daH) to millihenry (mH). Use an editable inductance converter, conversion formula, and reference table.
1 daH = 10,000 mH
Conversion formula
One decahenry equals 10,000 millihenry. Multiply your value in decahenry by this factor to get millihenry. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 decahenry:5 × 10,000 = 50,000 mH
Conversion table
| decahenry (daH) | millihenry (mH) |
|---|---|
| 0.01 | 100 |
| 0.1 | 1,000 |
| 1 | 10,000 |
| 2 | 20,000 |
| 5 | 50,000 |
| 10 | 100,000 |
| 25 | 250,000 |
| 50 | 500,000 |
| 100 | 1,000,000 |
| 1000 | 10,000,000 |
About these measurements
Inductance describes the relationship between changing current and induced voltage.
The base reference used here is the henry. One decahenry is 10 base units; one millihenry is 0.001 base units.
Important distinctions
A prefix changes only the scale of the inductance unit.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert daH to mH?
Multiply the quantity in daH by 10,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the millihenry to decahenry converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
