decahenry to centihenry
Convert decahenry (daH) to centihenry (cH). Use an editable inductance converter, conversion formula, and reference table.
1 daH = 1,000 cH
Conversion formula
One decahenry equals 1,000 centihenry. Multiply your value in decahenry by this factor to get centihenry. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 decahenry:5 × 1,000 = 5,000 cH
Conversion table
| decahenry (daH) | centihenry (cH) |
|---|---|
| 0.01 | 10 |
| 0.1 | 100 |
| 1 | 1,000 |
| 2 | 2,000 |
| 5 | 5,000 |
| 10 | 10,000 |
| 25 | 25,000 |
| 50 | 50,000 |
| 100 | 100,000 |
| 1000 | 1,000,000 |
About these measurements
Inductance describes the relationship between changing current and induced voltage.
The base reference used here is the henry. One decahenry is 10 base units; one centihenry is 0.01 base units.
Important distinctions
A prefix changes only the scale of the inductance unit.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert daH to cH?
Multiply the quantity in daH by 1,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the centihenry to decahenry converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
