centihenry to microhenry
Convert centihenry (cH) to microhenry (μH). Use an editable inductance converter, conversion formula, and reference table.
1 cH = 10,000 μH
Conversion formula
One centihenry equals 10,000 microhenry. Multiply your value in centihenry by this factor to get microhenry. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 centihenry:5 × 10,000 = 50,000 μH
Conversion table
| centihenry (cH) | microhenry (μH) |
|---|---|
| 0.01 | 100 |
| 0.1 | 1,000 |
| 1 | 10,000 |
| 2 | 20,000 |
| 5 | 50,000 |
| 10 | 100,000 |
| 25 | 250,000 |
| 50 | 500,000 |
| 100 | 1,000,000 |
| 1000 | 10,000,000 |
About these measurements
Inductance describes the relationship between changing current and induced voltage.
The base reference used here is the henry. One centihenry is 0.01 base units; one microhenry is 0.000001 base units.
Important distinctions
A prefix changes only the scale of the inductance unit.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert cH to μH?
Multiply the quantity in cH by 10,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the microhenry to centihenry converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
